Mitutoyo TM-500 Series Manuel d'utilisateur Page 29
- Page / 42
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
4. Maintenance
27
4.3 Replacing Consumable Parts
(1) Replacing the fuse
(2)Replacing the stage glass
1. While pushing the stage glass in the direction of the leaf spring, raise the glass at the front edge,
and then remove it.
2. Attach the leaf spring in place and mount new stage glass.
Stage glass
Leaf spring
When a fuse holder is as in the upper left figure
1. Turn off the contour and surface illumination switches and the
power switch, and the pull out the power cord.
2. Insert a screwdriver in the rectangular hole of the fuse holder
and raise the screwdriver grip, then a latch will separate and the
fuse holder will come out from the front.
3. Replace the fuse, and replace the fuse holder.
When a fuse holder is as in the lower left figure
1. Turn off the contour and surface illuminator switches and the
power switch and pull out the power cord.
2. Insert a screwdriver in the rectangular hole on the fuse holder
and turn it counterclockwise, then a latch will separate and a
fuse holder will come out from the front.
3. Replace the fuse, and replace the fuse holder.
㩷
CAUTION
Since the stage glass is pushed forward with the leaf spring, when you remove the stage glass, be
careful not to lose the leaf spring.
- TM-500 Series 1
- CAUTION㩷 3
- PRECAUTIONS 4
- WARRANTY 5
- CONTENTS 6
- Outline㩷 9
- 1.1 Description 9
- 1.2 Name of Each Part 10
- 13. Control panel 11
- 1.Outline 12
- Installation and Setup㩷 13
- 2.1 Package Contents 13
- 2.2 Installation Site 13
- 2.3 Setting-up 14
- 2.4 Checking and Adjustment 15
- 2.4.3 Adjusting the reticle 16
- Small workpiece 17
- 2. Installation and setup 17
- Measurement㩷 19
- 3.1.2 Replacing the lenses 20
- 3.1.3 Fixing the workpiece 20
- 3.1.4 Illumination modes 21
- (1) Contour illumination 21
- (2) Surface illumination 21
- 3.1.5 Replacing reticles 22
- 3.1.6 Adjusting the diopter 22
- 3. Measurement 23
- 3.2 Measurement 24
- 3.2.2 Angle measurement 25
- 3.2.4 Step measurement 26
- Maintenance 27
- 4.1 Cleaning and Lubrication 27
- 4.2 Inspection 27
- 4. Maintenance 28
- (1) Replacing the fuse 29
- (2)Replacing the stage glass 29
- Troubleshooting 33
- 5. Troubleshooting 34
- Specifications 37
- (6)Surface illuminator 38
- (8)Main unit dimensions 38
- Optional Accessories 39
- 7. Optional Accessories 40
- Reference Diagrams 41
- TM-510/510R 42
- Detail drawing of T-groove 42
Produits connexes et manuels pour Mesure, test et contrôle Mitutoyo TM-500 Series
(8 pages)Canon Rebel Ti 300V manuels
Manuels d'utilisation et guides de l'utilisateur pour Appareil photos Canon Rebel Ti 300V.
Nous fournissons des manuels en pdf 1 Canon Rebel Ti 300V à télécharger gratuitement par type de document : Manuel de l'utilisateur
Commentaires sur ces manuels